Main Attributes:

• Volume: 1000 kg/H
• Hot air: 650,000 kcal/H
• Heat transfer area: 9.9 m2
• Maximum use of pressure: 10 kg/cm2
• Consumption of combustion: 120 kg/H
• Total electrical power: 10.7 KW
• Pot water volume tenure: 180L
• Boiler weight: 2,360 kgs

1. Boiling tube
2. Explosion-proof valve
3. Tire input hole  
4. Dry distillation tank
5. Cisterns
6. Control panel
7. Pressure -
8. Gas covered
9. A combustion fan
10. Water valves
11. The main steam valves
12. Gas catheter
13. Super-heating properties
14. Water gauge
15. Combustion heaters
16. Subsidiary combustion furnace
17. Secondary combustion fan
18. Water Meter
19. Water Pump
20. Drainage Valve
21. The lower part of the gathering
22. Furnace cleaning mouth
23. Rear view inspection spy hole
24. The upper part of the system
25. Water vapor separator
26. Guiding fan 
27. Safety valve

 

Features:

• Automatic system that only requires routine maintenance
• 85% Efficiency utilising the latest technology
• Low load boiler offering years of trouble free use
• Quality steam - 100% dry by utilising ultra-performance heating system
• Highly efficient cleaning system utilising ash baffles
• Comprehensive maintenance checks easily performed

Waste Gasification Combustion System

Summary:

One of the world's biggest pollution problems - discarded tires - about 300-million of them each year can be turned into usable fuel. Discarded used tires are increasing annually by 20% and is causing concern for local authorities and manufacturers. Utilising the Waste gasification combustion system, used tires can be disposed of safely and the generated heat can be used effectively.

Features:

• No preprocessing - discarded old tires can load into the furnace without any processing.
• The process is completely thermal dry distillation therefore the combustion gas can easily be utilized.  The ash residue is minimal and can be reused or landfilled.
• The flammable gas recycling control combustion system is a simple process without risk of explosions.
• The combustion gas is very clean, except special waste treatment, the post processing work is not required.
• The high temperature combustion gas has a wide range of uses - steam generation, heating, drying… etc.
• All the system procedures and processes are simple therefore avoiding heavy maintenance and operating costs.

Fuel Sources - wood, discarded tires, waste plastic and other organic waste.

The waste dry distillation and gasification system is a completely dry distillation method producing almost no black smoke and can burn discard without pollution.
The produced dry distillation gas can be converted into a fuel source.